Setup=
NewAddress=New address
AddressBook=Address book
Host=
Password=
Username=User name
Connect=
Disconnect=
Exit=
Back=
Cancel=
Save=
O-1=Connection type
O0=Desktop size
O1=Performance
O2=Keyboard layout
O3=Startup password
EnterPass=Enter password
RePass=Retype password
NotMatch=Password entries did not match. Please reenter the password.
O4=Assign keys
O5=Desktop orientation
O6=Screen mode
BitCach=Bitmap caching
Default=
Left=
Right=
UnAss=unassigned
Ass=assigned
A0=Press a key
A1=Key
A2=Code:
A3=to assign for
A4=[0] - Back
K-2=Select
K-1=Menu
DeskSize=Desktop size
ConnectTo=Connect to
PleaseWait=Please wait
Ok=
Keyboard=
Send=
Help=
Scroll=Scroll mode
Mouse=
M0=Click
M1=Double Click
M2=Right Click
M3=Click and Hold
SendKey=Send key
Keys=
InsertKey=Insert key
Delete=
Address=
TCPMDS=Please, select the connection type:
Connection=
DisWinSes=This will disconnect your Windows session. Your Programs will continue to run while you are disconnected. You can reconnect to this session later by logging again.
Custom=
Field=


RKUnReg=This program is unregistered. The trial period expires on <>. If you want to register this program, please visit our site www.shapeservices.com to purchase the license code.

Exception=
E1=Incorrect response message, code:
E2=Can't connect to host: ~. Please make sure that you specified the correct host address and the host is accessible through network. Also please check network settings of your device.
E3=Response code
E4=Response message
E5=Please try to register again a bit later, or if this error appears constantly, please send the problem report to our technical support at: tsmsupport@shapeservices.com
E6=Initialization error, step -
E7=Connection was broken. Please try to reconnect by using Reconnect button.
About=
MC=The maximum quantity of connections for unregistered version is reached. You can connect to host again after about a hour. Please visit our site www.shapeservices.com to purchase registration key for this product.
Error=
Unreg=Unregistered
SessNotClose=Session not closed
Device=
Magnifier=
ZoomIn=Zoom in
ZoomOut=Zoom out
Traffic=Traffic meter
LastSess=Last session
Incoming=
Outgoing=
Total=
RegKeyNot=Registration key is not specified
DirIn=Direct input
Desc=Description
FullDesk=Full screen

ResetSett=Reset settings
RS1=This operation will reset all settings of the client including address book, startup password, etc. You can't restore them after resetting. Do you want to continue?
RS2=Are you sure that you want to reset all settings of the client?
Attention=
IncorrectField=Incorrect field:
Edit=

Reg1=TSMobiles Registration
Reg2=Please enter your license code:
Reg22=Select "Try" if you don't have a license code yet. Select "Buy now" item from menu to purchase the license code or purchase it from site www.shapeservices.com.
Reg2n=Please enter your license code:
Reg22n=If you don't have a license code yet, select "Try" or you may purchase it from site www.shapeservices.com.
Reg3=The license is typed incorrectly. The license consists of 15 symbols, letters and digits only, no spaces or special symbols, all lowercase. 0 is zero (not capital "O") 1 is one (not lowercase "L"). If you still get the same error, please contact tsmsupport@shapeservices.com.
Reg3bb=The license code is typed incorrectly. The license consists of 15 symbols, letters and digits only, no spaces or special symbols, all lowercase. 0 is zero (not capital "O") 1 is one (not lowercase "L"). If you still get the same error, please select "Support" item from menu and fill out the form.
Reg4=Request of registration.
Reg5=Request of trial.
RegKey=License code

Register=
Trial=Try
Info=
deviceID=Your deviceID (IMEI)
SupportWEB=Technical support: http://www.shapeservices.com

SendSC=Send shortcut
InsertSC=Insert shortcut
Shortcut=
Reconnect=
TextCur=Text cursor
Sure=Are you sure?
Yes=
No=
BadPass=Password is incorrect
CannotSave=Please specify name or address of the host.
BadPort=does not represent a valid port number.
ErrConRegSer=Can't access registration server to check program availability. Please check network settings of your device and restart the program. If you still get the same error, please contact tsmsupport@shapeservices.com
ErrConRegSerbb=Can't access registration server to check program availability. Please check network settings of your device and restart the program. If you still get the same error, please select "Support" item from menu and fill out the form.
Details=
Close=
OnlyMIDP2=Sorry, this application is available for MIDP2 (or higher) devices only.
EDR=Please specify desktop size
DelAccount=Deleting account:

Welcome=
OptNetSet=Do you wish to run Autoconfigurator to setup the optimal network settings?
Continue=
AutoConn=Autoconfig connection
AutoConnText=Autoconfigurator will try to define the most optimal connection settings for the application. This procedure can take some time. If you know how to configure these settings by yourself, you can skip this step.
Start=
BreakTest=Break test
AutoConnRep=Autoconfig report
SentLog=Send log to support
SendLog=Request was sent to email
Autoconfig=
Support=
Protocol=
SendReq=Send request
EnterDesc=You should enter error description in order to send the support request.
NoDetail=No detail information...
AddReport=Do you wish to include in report the test of available connections?

DRLL=Desktop size can't be less than 320x240.
DRHL=Desktop size can't be more than 1280x1024.
DRPR=Not enough memory. Please reduce display resolution

RR-2=Unknown registration error (reason #[]). Please contact tsmsupport@shapeservices.com
RR-2bb=Unknown registration error (reason #[]). Please select "Support" item from menu and send the request to our support team.
RR0=TSMobiles is registered. Thank your for using this product.
RR2=License code is already in use (reason #2). Please specify another license code. If you have any problems during registration you can contact tsmsupport@shapeservice.com
RR2bb=License code is already in use (reason #2). Please specify another license code. If you have any problems during registration, please select "Support" item from menu and fill out the form.
RR11=Your license code is intended to register another SHAPE Services product (reason #11). Please contact tsmsupport@shapeservices.com and we will help you exchange the license.
RR11bb=Your license code is intended to register another SHAPE Services product (reason #11). Please contact us by select "Support" item from menu and we will help you exchange the license.
RR30=The license code was cancelled (reason #30). You may have requested a refund or exchange for another one. If none of these reasons apply, please contact tsmsupport@shapeservices.com
RR30bb=The license code was cancelled (reason #30). You may have requested a refund or exchange for another one. If none of these reasons apply, please select "Support" item from menu and fill out the form.
RR4=Your license code expired (reason #4). If you want to purchase license code now select "Buy now" item from menu or purchase it from site www.shapeservices.com
RR4n=Your license code expired (reason #4). You may purchase it from site www.shapeservices.com
RR4000=Trial expired. You need to have a license code to register. If you want to purchase it now select "Buy now" item from menu or you may purchase it from site www.shapeservices.com
RR4000n=Trial expired. You need to have a license code to register. You may purchase it from site www.shapeservices.com

Language=
SelectLang=Please select language
LN0=Auto detect
LN1=English
LN2=German

SR0=Request type:
SR1=Support request
SR2=Name of your wireless carrier:
SR3=Brief Description:
SR4=Description of issue experienced:
SR5=Error message text:
SR6=Send log to support
SR7=Feedback
SR8=Enter your comment and suggestions:


ACR_BAD_RESULT_NO_SERVICE_RECORDS=Unable to find service book entries. Use menu item Guide to get more information or send the log to our support team.http://www.shapeservices.com/en/faq/sections/bb.php?platform=bb#ippp
ACR_BAD_RESULT_WITH_SERVICE_RECORDS=Unable to find successful configuration. Use menu item Guide to get more information or send the log to our support team.http://www.shapeservices.com/en/faq/sections/bb.php?platform=bb#ippp
ACR_OK_RESULT_FOUND_HTTP=Test finished successfully. HTTP connection found only. Use menu item Guide to get more information or send the log to our support team.http://www.shapeservices.com/en/faq/sections/bb.php?platform=bb#connect
ACR_OK_RESULT_TRY_LATER=Successful configuration found. You can start Autoconfigurator again by selecting Setup-Autoconfig item from the setup menu. Use it if you change your carrier or tariff plan.
ACR_TEST_WAS_ABORTED=The test was aborted. It is recommended to complete test starting it again from menu

E23=Connection problem. Check your connection settings and try again.

Reminding=Your BlackBerry has an outdated OS version 4.0. For proper work we recomend that you upgrade your BlackBerry OS to the latest version available. Refer to your carrier for detailed information.
NoRemind=Don't remind me of it.

Updates=Check updates
CanNotOpenURL=Sorry, this device cannot handle the URL requested.


ODBL=Dbl mouse click
ODBL1=Triple mouse click
ODBL2=Delay between clicks

ScrollOn=Scroll mode on
ScrollOff=Scroll mode off
TextCurOn=Text cursor on
TextCurOff=Text cursor off

Changes=Changes made!
Discard=

ConsSess=Console session
BuyNow=Buy now
SendText=Send text
Repeat=


Shortcuts=
AddNew=Add new
MoveUp=Move up
MoveDown=Move down
MoveTop=Move top
MoveBott=Move bottom
SCName=Shortcut name
KeySeq=Key sequence
AddKey=Add key
DelSC=Delete shortcut. Are you sure?
IsEmpty=is empty
SCEmpty=Shortcut list is empty
Modify=

ListMenu=List menu
AltSel=Alternative menu
Select=
L1=Connect to computer
L2=Edit computer address
L3=Delete address
L4=Back to list
Others=
StartLogo=Startup logo
LogoDOff=Logo without delay
RemMess=Remind messages
Reset=
New=

WiFi0=Turn WiFi off
WiFi1=Turn WiFi on




